K.O. LEE SURFACE GRINDERS
K.O. LEE is part of the LeBlond family of machine tools. Meeting the high standards of LeBlond, K.O. Lee rounds out the product lines with their surface grinders.
Coming in 4 different models each a little larger than the next, you will find an industrial surface grinder that works well for your applications.
Finally K.O. Lee offers a universal toolcutter and grinder: KOL60M.
KOL-618 Surface Grinder.
FEATURES:
-
(KOL-818M*pictured)
-
6″ x 18″ (152.4 x 457.2mm) TABLE
-
MANUAL OPERATION
-
3 PHASE or SINGLE PHASE
-
PERMANENT OR ELECTRO MAGNETIC CHUCK OPTIONAL
-
OTHER CUSTOMIZED OPTIONAL EQUIPMENT AVAILABLE
Economical and easy to operate.
Our manual and automatic industrial K.O. Lee surface grinders offer all of the accuracy of more expensive surface grinders, with the same quality features.
.png)
K.O.LEE: KOL-1020A GRINDER
-
9.8″ x 19.7″ (250 x 500mm) TABLE
-
MANUAL OR AUTOMATIC OPERATION
-
ELECTRICS: 230V/3ph/60Hz
-
PERMAMENT OR ELECTRO MAGNETIC CHUCK AVAILABLE
-
OTHER CUSTOMIZED OPTIONAL EQUIPMENT AVAILABLE
-
THE FEATURES:
-
-
PRECISION GRINDING SPINDLE:
-
The K.O. Lee 1020A industrial surface grinders precision cartridge is greased and free of maintenance.
-
Comprised of Class 4 super precision angular contact bearings suitable for heavy grinding.
-
The spindle is directly coupled with motor. This ensures spindle run out accuracy of less than 0.002mm (0.00008”).
K.O. LEE: KOL-1224A GRINDER
THE BASICS:
-
11.8″ x 23.6″ (300 x 600mm) TABLE
-
MANUAL OR AUTOMATIC OPERATION
-
ELECTRICS: 230V/3ph/60Hz
-
PERMAMENT OR ELECTRO MAGNETIC CHUCK AVAILABLE
-
OTHER CUSTOMIZED OPTIONAL EQUIPMENT AVAILABLE
-
(Pictured the KOL-818M)
THE FEATURES:
-
Electrics: 230V/3ph/60Hz *other voltages available
-
Automatic or Manual Operation of X Axis (Single Axis Automatic)
-
Automatic or Manual Operation of X & Z Axis (Two Axis Automatic)
-
Ball Screw for Cross Feed
-
Grinding Wheel with Flange
-
Diamond Wheel Dresser
-
Wheel Flange Extractor
-
Wheel Wrench
-
-
Balancing Arbor & Stand
-
Auto Lubrication System
-
LED Work Light
-
Toolbox with Adjusting Tools
-
Leveling Screws with Blocks
-
Operation Manual with Parts List
-
Rear Splash Guard
K.O. LEE: KOL-1632A GRINDER
THE BASICS:
-
15.7″ x 31.5″ (400 x 800mm) TABLE
-
MANUAL AND/OR AUTOMATIC OPERATION
-
ELECTRICS: 230V/3ph/60Hz
-
PERMANENT OR ELECTRO MAGNETIC CHUCK OPTIONAL
-
OTHER CUSTOMIZED OPTIONAL EQUIPMENT AVAILABLE
-
(Pictured the KOL-818M)
THE FEATURES:
-
Electrics: 230V/3ph/60Hz *other voltages available
-
Automatic or Manual Operation of X Axis (Single Axis Automatic)
-
Automatic or Manual Operation of X & Z Axis (Two Axis Automatic)
-
Ball Screw for Cross Feed
-
Grinding Wheel with Flange
-
Wheel Flange Extractor
-
Wheel Wrench
-
Balancing Arbor & Stand
-
Auto Lubrication System
-
LED Work Light
-
Tool Box with Adjusting Tools
-
Leveling Screws with Blocks
-
Operation Manual with Parts List
-
Diamond Wheel Dresser
KOL40M INDUSTRIAL SURFACE GRINDER
_edited.jpg)
Need to machine a tool with extraordinary precision?
The K.O. Lee Industrial Surface Grinder is an excellent choice.
-
It has table that can be easily controlled from fine to rapid feed range for your various grinding requirements.
-
The wheelhead is designed so that it can be tilted easily to ± 15 degrees.
-
It can be swiveled 360 degrees on the horizontal plane.
Both of these features make it easy to set rake and relief angles.
-
The K.O. Lee industrial surface grinder spindle assembly is designed so that the spindle shaft is supported by two pairs of angular ball bearings; i.e. one pair at each end of the spindle support.
-
The spindle is grease lubricated for life and no additional lubrication is required.
-
The workhead can be positioned on the table as desired by the operator and can be swiveled accurately at any horizontal and vertical angle.
-
It has a taper hole in each end of the spindle; i.e. NT#50 / MT5.
-
In order to machine various grinding requirements, the table can be easily controlled from fine to rapid feed range.
-
The table feed mechanism is designed to be controlled by fingertip action.
-
The spring cushioned table dogs are used for both positioning the table as well as absorbing table return traverse shock.
-
The table ways are hardened, ground and anti-friction bearings are used. It swivels 120 degrees.
-
The right and left tailstocks can be easily positioned any place on the table.
-
The right tailstock has a retractable center for easy mounting and is mounting of the workpiece.